Honda SL-70
(410) 799-3578  Mon - Fri 10:00am - 5:30pm EST
Re Mix Reproduction Rubber and OEM  Honda parts
Open 24 hours a day on the web
click here for orders shipping outside USA or paid by check

Genuine Replacement Motosport SL, XL Series Parts


NEW! Replacement PLASTIC Side covers Fit SL100 SL125 XL100 and XL125. LEFT (battery) or RIGHT (carburetor) please choose one. Will need to be prepped and painted to suit your model. Sold each.

$69.00 each


NEW! Replacement PLASTIC left and right side covers. Fit SL100 SL125 XL100 and XL125. Will need to be prepped and painted to suit your model. Sold as a set. You will get both left AND right side covers.

$129.00 set

Our replacement for the Honda plated cable guide MT125, MT250, MR175, XL100, XL125, XL175, XL250, XL350. Comes with inner cable guide.

$9.95

Clutch disks (fiber)

All Balls tapered steering bearings. Drop-in replacement to upgrade from OEM ball-type bearings to taper bearings. Comes with seal (not shown)

$40

fuel filter on all standard grade gasoline

Universal inline fuel filter for all standard gasoline fuels - will not be harmed by E85 gasolines

$4

fuel filter on all standard grade gasoline

Universal inline fuel filter for all standard gasoline fuels - will not be harmed by E85 gasolines. 90 degree for tighter fit areas on small bikes.

$4

Fork seals

Fork seals fit CL90, CT90(71-79), S90, CB100, CL100, CT110, CB125S, CL125

$9.95 set

Fork seals

Fork seals fit SL100(K0-K1*) up to frame #21738

$9.95 set

Fork seals

Fork seals fit MR175, CT125(77), MT125, SL100(K2-K3), XL100, XL125, XL175, XL185, SL125, TL125

$9.95 set


Replica chrome steel front brake cable clip. p/n 45469-116-000. Found on left fork lower of 1973-75 XR75, 1974-75 MR50, 1974 XL100 and XL125. Includes 6 x 12 hex bolt and 6mm flat washer to secure to fork.

$12

Lever set with rubber tip - Fits SL70, XL70, XR75, Late model CT90, SL100, SL125, CB350, SL350, CB360, XL250, CR125/CR250M and many other models that use p/n 53175-369-700 and 53178-369-700

OUT OF STOCK

Honda SL70 grips set

After market lever bracket with black finish. Perfect replacement for XR75, TL125, XL70, SL125 and CR125. Same casting as the Honda but obviously not the price that Honda charges. Choose left or right (shown).

$12.95

Honda SL70 grips set

Newly remanufactured, high quality polished lever brackets. Set of left and right

$22.95

Honda SL70 grips set

Newly remanufactured, high quality polished lever brackets. Right bracket

$12.95

Honda SL70 lever bracket

Newly remanufactured, high quality polished lever brackets. Left bracket.

$12.95

CT70 carb rebuild kit

Complete Keyster carb kit. gasket, o-rings, air/idle screw, springs, main jet, needle/seat. Fits SL100 and late model SL125

$29.95


Replacement 24mm carburetor for all models.

$79.00

This Jet Kit is for the 24mm carb and 26mm Oko Carb available in this section and includes the following sizes (stock size is an 95 on the 24mm and 125 on the 26mm): # 85, 95, 100, 105, 110, 115, 120, 125, 130 & 135

$15.00

Nippondenso Replacement points. Fit models:
ATC110 1979-80
ATC90 K0 - 1978
CM91
CL90/S90/SL90/ST90
CA160
CA175/CD175
CB100/CL100/SL100/XL100
CB125S/CL125/SL125/XL125
CB160/CL160
CB175 K3-K7
CB200/CB200T
CL175/CL200
CT125
SL175/XL175
TL125/TL125S
TL250
XL250/XL350

$9.95

Kokusan replacement points for Honda 30202-028-003. Fit models:
CM91
CL90/CT90/Trail 90
S90/Super 90
SL90

$9.95

Replacement condenser. Fit models:
SL100, SL125, XL100, XL125
CB100, CL100, CB125S, CL125 up to 1978

$9.95

70cc gasket set Honda SL/XL70 CT70

100cc complete gasket set for CB100, CL100, SL100, XL100

OUT OF STOCK

Top End Gasket set 125cc

$19.95 - SALE!

Bottom End Gasket set 100cc engines SL100, CL100 and CB100. Correct clutch cover gasket and o-rings for 125cc engines but center case gasket is not correct.

$10

spark plug Z50, CT70, XR75, QA50

Spark plug for TL125 '73->, TL250, XL250, XR250, SL100, XL100, SL125, XL125, See your owner's manual for gap size.

$2.95

silver wire sheathing

Re-cover your wires with silver tubing just like the original. This casing diameter covers a one or two wire switch, but not 3 wires. Sold by the foot.

$3 per foot

silver wire sheathing

Re-cover your wires with silver tubing just like the original. This casing diameter covers a three or four wires. Sold by the foot.

$3 per foot

5 piece clutch fiber set for 100cc and 125cc engines SL100 SL125 CB100 CL100 XL100 XL125 CB125S

$25.95

Complete clutch pack - 5 piece fiber, 4 steel plates for 100cc and 125cc engines SL100 SL125 CB100 CL100 XL100 XL125 CB125S

$42.95

Heavy duty continuous cam chain for 100 and 125cc Honda engines. No master link. Available in 98 and 100 links.

$39.95

Honda Z50 engine seal kit

Engine oil seal set for SL100, SL125 CB100, CB125, CL100, XL100, XL125. Counter shaft, shift shaft, Kick shaft and points cam oil seal.

$15.95 - 4 seals

Piston Kits for SL100, XL100, SL125 and XL125 from Standard Bore to 3rd Over size (depending on model/year). Complete with pin, circlips, and rings as shown above.

$29.95

 
35T rear sprocket

35 tooth rear sprocket. Steel - made in Japan

$26.95

39T rear sprocket

39 tooth rear sprocket. Steel - made in Japan

$26.95

brake shoes Z50, CT70, XR75, QA50

High quality brake shoes for front or rear. XR80, CB100, CL100, SL100, XL100, CB125, SL125, XL125

$15.95

mh212
`

SL100/125 Muffler. In stock!

Product Code MH212. Does not include heat shield.

$269

mh001

SL100/125 Header pipe. In stock!

Product Code MH001

$109

SL100/125 Muffler. Will also fit the XL100 model. Uses MH001 header.

Product Code MH222. Use MC35 clamp

$269

Honda SL70 and XL70 seat cover. Honda seat logo. Fits all years of SL/XL 70.

An exact reproduction seat cover for the Honda SL100, SL125 K0 and K1. Heat pressed seams and correct Honda seat logo. Fits all years of SL100 and SL125.

$74.95

Honda SL70 seat studs

Tacks, studs, chrome set of 8 for the SL70K0.

$10.00 set

Honda XL70 seat cover

An exact reproduction seat cover for the Honda XL100 seat cover. Honda seat logo. Fits all years of XL100. Made in USA.

$60


Flat washers in various sizes and quantities

$1.10 - $2.50

Choose Sizes (qty)

Lock washers in various sizes and quantities

$1.10 - $2.95

Choose Sizes (qty)

Hex nuts in various sizes and quantities

$2.50 - $5.50

Choose Sizes (qty)

4mm Pan Screws sold in pack of 10 or 25. Prices vary from $2.95 - $6.75

Choose Sizes (qty)

5mm Pan Screws sold in pack of 10 or 25. Prices vary from $2.90 - $7.75

Choose Sizes (qty)

6mm Pan Screws sold in pack of 10 or 25. Prices vary from $2.90 - $10.50

Choose Sizes (qty)
cotter pin

3 x 25 split pin. Fits rear axle MR50, front and rear of almost all other minis including XR, XL, SL, CT, CR125. Brake pivot on some bikes.

$0.35

Reproducton chain guide replaces Honda p/n 52156-074-000. Used on 1973-78 XR75, 1979 XR80, SL90, SL100, XL100 1974-76, SL125.

$15.95

Inner tube front or rear. These are very good quality tubes without the weight of the heavy duty tube. Good for racing and every day use. Choose size.

3.5 x 18 rear tube

2.75/3 X 21 front tube

$16.95