Fill the hole on your Z50 headlight bucket with the same size/shape plug that came with the bike. Some call this the useless hole plug. P/N 61313-045-670
$7
6v high beam indicator/ signal indicator bulb for CT70.
$3.50
90-degree rubber elbow inside headlight bucket that connects the high beam or neutral light bulb wiring to the indicator. These rubber elbows also work with all the Honda's from the 1960's and 1970's
$5 each
Headlight and trim ring as shown (no housing/bucket). This is an OEM Honda part and fits Z50A K1-K2. The bulb is only a single pole bulb so you need to
order the replacement socket kit for the US model.
$79
Complete headlight with all of the necessary parts included. This is an after market bucket, an OEM Honda housing, lens and trim ring,
the high beam indicator kit, and the socket kit.
$180
Replacement headlight - fits Z50A 1972-1978 (K3-1978) and CT70 models with speedo in bucket. Comes with trim ring, headlight bulb and pigtail, but no bucket or mounting hardware.
Airbox air filter element retainer. Discontinued by Honda so we had them made. Fits Z50A and QA50(#2 in microfiche). Included in complete QA50 air box.
$5.95
2 position switch. Hi-Lo beam selector. Z50, CT70 and others. Requires replacement wire with gray sheathing to be compatible with some models. Wiring available on after market parts page.
$19.95
Condenser. Fits Z50A K1-78
$7.95
C6HSA spark plug. See your owner's manual for gap size.
$2.95
$18.95 Ignition kit
Plug, points and condensor
Points, breaker contact. Fits Z50A/K1-K6 ‘76-’78
$8.95
Aftermarket spark plug cap for Z50, Z50R, MR50, QA50, CT70 to 1978, SL70 K0-K1, XL70 up to 1976, and all XR75/XR80 and XL75/XL80 models. No marking so it looks like the original. Included with the replacement coil.
$5.75
NGK spark plug cap - Z50, Z50R to 1985, QA50, SL70, XL70, CT70 and many more. As shown, but the price is right.
$4.00
Replacement coil. Comes with spark plug cap. Fits Z50 K0-K2. Up to and including 1971. Not for 1972-78 models (see below).
$30
Replacement coil. Comes with spark plug cap. Fits Z50A K3-1978. Not for 1968-71 models (see above).
$61.95
Motorcycle Fuel Tank repair kit by POR15. This is the fuel tank system we use in our restorations. Cleans, etches the tank, and seals the rust to prevent any more from forming. Will also seal pinholes in the steel tank. One kit will fix up to a 5 gallon fuel tank. Can not be shipped by air.
$55.95
Heavy Duty Motorcycle Fuel Tank repair kit by POR15. Same as the smaller kit, but it adds stripper so you can remove the KREEM and other inferior sealer that you find before lining it correctly. Cleans, etches the tank, and seals the rust to prevent any more from forming. Will also seal pinholes in the steel tank. One kit will fix up to a 5 gallon fuel tank. Can not be shipped by air.
$61.95
Wiring harness fits Z50A K1
$30
Wiring harness fits Z50A K2
$30
Wiring harness fits Z50A K3-78 (1972-1978)
$30
Complete Keyster carburetor repair kit. Needle, setat, pilot jet, main jet, screws Z50A K0-K1 or 1972-75
$25.00 - SALE!
Complete Keyster carburetor repair kit. Needle, seat, pilot jet, main jet, screws. For 1976 - 1978 Z50A
$39.95
Universal inline fuel filter for all standard gasoline fuels - will not be harmed by E85 gasolines. 90 degree for tighter fit areas on small bikes.
$3.95
High quality injection molded seat foam. Made in the USA. Z50A K0-K2
$53.95
Reproduction seat cover using heat pressed seams for the Honda Z50A K3-K6 seat. Some seats had an embossed logo on the back. These seats
do not have any logo on back. Use our stencil to add the HONDA logo.
$45
Tacks, studs, chrome set of 10 for the Z50K3-K6 seat.
$11.50
Reproduction seat cover using stiched pattern for the Honda Z50 seat. Honda logo included. K3 model shown. Early bikes have a peat pressed/rolled
and pleated pattern, but no seam down the back (not shown). All have the HONDA logo stenciled on back.
$69.95
Self-adhesive seat pan edge protector. Keeps sharp pan from cutting new fabric. Same as original.
$6.50
Complete gasket set Z50A 1969 - 1978
$15.00
Gasket clutch cover fits Z50A and CT70 3-speed models
$7
Heavy duty cam chain for Z50, Z50R, CT70, ATC70, SL70, XL70. Continuous chain. Sorry no master link available at this time.
$18.95
Aftermarket engine seal kit for Z50A CT70 SL70 XL70 models
$11
Z50 fuel tank badges. Excellent reproduction badges with mounting screws.
$55.00
Replacement shock set for K3-78 or Z50R model. Very similar appearance to the original shocks and same length. CHROME IS BACK IN STOCK!
$65 set of 2
Replacement rede top battery with green casing for Z50A-K1. Limited inventory
$25.95
Replacement kick stand and spring
$13.95
Reproduction muffler guard early Z50A, not slant guard
$12
Drive chain 82 link. (may need to be cut to length)
$15.95
Replacement kick lever for Z50/CT70. Longer arm with offset.
$16.95
Replacement 'short' kick lever for Z50.
$13.95
Replacement counter sprocket. Choose size
$8.95
After market rear sprocket. 37T steel.
$25
Chain and sprocket set. Buy the 420 chain, 12T (Z50A) 13T (Z50R) counter sprocket and 37T rear sprocket as a set and save!
$45.95
Reproduction chain guard early Z50A - made in stainless steel to lower cost.
Aftermarket small scale taillight complete with lens, lens screws, bulb and chrome base. early Z50, CT70 (69-73), SL70 K0, SL90, SL100. Honda reference 33701-045-671
$19.95
6v bayonnet style 2-pole bulb
$2 each
High quality brake shoes for front or rear. XR75 1973-78, SL70 1971-1973, XL70 '74-76, QA50, CT70, Z50 (some), '79 Z50R. They even come with new springs!
$10.00 - SALE!
Inner tube - 3.5 x 8.0 for Z50A, Z50R
$10.95
Bridgestone Trail Wing tire - 3.5 x 8.0 for Z50A, Z50R. These are NOT raised white letter as shown. Still only $10 to ship continental US!
$39.95
Z50A Rim set. Very nice aftermarket polished aluminum rim set (8x2.75" - stock size). Includes one left and right
side rim and hardware to fasten rims to each other. For street or trail use, not motocross